If you're looking to add a personalised touch to your champagne glasses for a special occasion or event, applying a vinyl decal is a fantastic way to achieve just that. Vinyl decals can be customised to your liking and are relatively easy to apply. In this step-by-step guide, we'll walk you through the process of applying a vinyl decal to a champagne glass.
Step 1: Gather Your Materials
Before you begin, make sure you have the necessary materials handy:
- Vinyl decal: Choose a vinyl decal design of your choice, ensuring it's sized appropriately for your champagne glass.
- Champagne glass: Clean and dry the glass thoroughly to ensure a smooth surface for application.
- Rubbing alcohol and cotton balls: Use these to clean the glass surface before applying the decal.
- Something to rest your glass on: It's tough to hold the glass while applying it, so resting it on a cushion or other soft surface can help.
Step 2: Prepare the Glass
Start by cleaning the champagne glass using rubbing alcohol and a cotton ball. Wipe the surface thoroughly to remove any dirt, oils, or residue that might prevent the decal from adhering properly.
Step 3: Measure and Position the Decal
Measure the circumference or height of the champagne glass to determine the appropriate placement for the decal. Use a tape measure to ensure precise measurements and keep it straight.
Step 4: Peel Off the Backing
Gently peel off the backing from the vinyl, making sure the vinyl design adheres to the transfer tape.
Step 5: Position the Decal on the Glass
Carefully position the transfer tape with the vinyl decal onto the champagne glass, aligning it with your predetermined measurements. Press the transfer tape onto the glass, securing the decal in place.
Step 6: Smooth Out the Decal
Use a credit card or your fingers to smooth out the vinyl decal, ensuring there are no air bubbles or creases. Start from the centre and work your way outwards to achieve a seamless application.
Step 7: Remove the Transfer Tape
Slowly and carefully peel off the transfer tape, leaving the vinyl decal adhered to the champagne glass. If any part of the decal starts to lift, press it down again and peel more gently.
Step 8: Allow the Decal to Set
Let the applied vinyl decal set and adhere to the champagne glass for at least 24-48 hours before washing or using the glass.
By following these steps, you'll successfully apply a vinyl decal to a champagne glass, adding a personal touch for any hen parties, bridal showers or birthday celebrations.
If all this sounds too much, you can also buy ready-made champagne flutes directly from us, we'll take care of all the personalisation & application!
